Flat rate shipping of $10 now available for orders up to $160.

Beast 5.56 AR-15 Semi-Automatic Billet Rifle 16"

Only 4 left


Availability:In stock


Country of Manufacture:US

Weight:15 lbs


"Beast" - 5.56 AR-15 Semi-Automatic Rifle - 16" 1/7 Twist

The world’s first AR fully shielded by WMD’s proprietary NiB-X nickel boron coating process—inside and out! Lesser ARs are much more vulnerable to moisture, corrosion, lubricant buildup, and powder fouling. But the 5.56
 Beast from WMD is practically unstoppable, thanks to our NiB-X coating technology. NiB-X not only guards against friction and wear, it virtually eliminates feeding problems associated with buildup of lubricant and residue.  

The rifle comes with two magazines, one NiB-X 30 round magazine and a polymer magazine. and is packed in a ballistic fabric tactical bag, the Beast is ready 
for extreme performance in any environment, with MOA potential right out of the box.

In accuracy testing this rifle liked: Federal 69gr Match Kings = .75 moa at 200 yards Hornady 55gr FMJBT = 1.25 moa at 100 yards Federal American Eagle 55 gr FMJBT = .50 at 100 yards



  • LOWER RECEIVER: Billet 7075-T6 Aluminum Machined To Mil Spec Dimensions, Front Magazine Well Finger Grips,  Nib-X Nickel Boron Coated For Durability
  • UPPER RECEIVER: Billet Mil-Spec 7075-T6 Aluminum With M4 Feed Ramps. Nib-X Coated For Lubricity And Durability
  • BARREL: Match Grade Chrome Moly Vanadium Steel, 1:7 Twist, 16″ Government Or M4 Profile, Carbine Gas System, Nitromet QPQ Salt Bath Nitrided In The Bore For Extended Life And Accuracy, Nib-X Coated On The Outside For Durability And Heat Dissipation
  • BARREL EXTENSION: NiB-X Coated Barrel Extension For Extremely Smooth Locking And Unlocking With The Bolt
  • GAS SYSTEM: Low Profile Gas Block, CNC Machined From 4140 Steel And Nib-X Finished, Nitromet QPQ Carbine Length Gas Tube, Direct Impingement
  • MUZZLE DEVICE: Compensator, 17-4 PH Stainless Steel, Nib-X Coated
  • BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Nib-X Coated For Reliability And Ease Of Cleaning, Properly Staked Gas Key
  • FIRE CONTROL GROUP:  Hammer, Trigger and Disconnect coated in NiB-X for lower pull force (<6 lbs) and smooth reset
  • BUFFER: Carbine Buffer
  • SIGHTS: Optics Ready
  • HANDGUARD: Free Float Aluminum, M-LOK 15" Nib-X Coated Handguard
  • RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum, Nib-X Coated Inside And Out
  • BUTTSTOCK: Ti-7 Black Triangular Cheek-Weld Design For Comfort, Rugged Materials For Durability, Rubber-Like Buttplate For Non-Slip Contact Surface, 2 Water-Resistant Storage Chambers For Batteries Or Cleaning Kits
  • PISTOL GRIP: Black Pistol Grip
  • Black Tactical Bag:  Ballistic Fabric Tactical Bag With Exterior Magazine Pockets, Shoulder Backpack Straps, Range Ready.
  • Made In The USA!


All WMD Guns’ Products Carry A 100% Satisfaction Guarantee Against Defects In Original Materials And Workmanship And Lifetime Guarantees On The Nib-X Coating From Flaking, Chipping Or Wear. If Your WMD Guns Product Shows Evidence Of Such Defects, WMD Guns Will Make Every Accommodation To Fix, Repair, Or Replace Your Product In The Most Expeditious And Inexpensive Manner Possible. WMD Guns Does Not Warranty Products Or Damage Caused To Our Products By The Correct Or Incorrect Installation Of Other Manufacturer’s Products. Be Sure To Retain Your Sales Slip As Proof Of Purchase Date When Making A Claim.

Additional Information

  • Caliber:                  5.56mm NATO
  • Gas System:         Carbine
  • Product Weight:    7.1 Lbs
  • Length:                  33” – 36.5”
  • Magazine:             2 Nib-X Coated 30 Round Aluminum Magazines With Magpul Follower
  • Case:                     Ballistic Fabric Tactical Bag

Additional Information

FFL Restriction

Please note that this product can only be shipped to an authorized FFL dealer. You may purchase this product from WMD Guns online store, but in order to receive your product, you will need to do the following:

  1. Send your order receipt to an authorized FFL dealer in your state.
  2. Ask them to forward your order number plus their FFL license to WMD Guns at or fax to (772) 324-9919.
  3. Once your order is approved, it will be shipped to your dealer, who can help you complete the steps required by your locality in order to take ownership of your purchase.

Customer Reviews

Beast Rifle Review by GG
Hi folks. Just wanted to say thanks For My Beast. I have had it for several years and love shooting it. It has never failed me and is a easy to clean. Everyone that sees it or shoots it wants one after :). Here is a pix of it on patrol in the Hills of the southwest I snapped when I was out hiking. thanks again and really looking forward to getting its big brother down the line when I upgrade From my DPMS AR-10. (Posted on 9/17/2018)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Contact Form